Automatic Centrifugal Mineral Oil Separator Disc Stack oil purifier
Oil water centrifuge separator
I. Application
Sino-NSH centrifuge is a centrifuge separator which can separate
solid matters from two kinds of different density liquids on a
continuous basis and also can separate two liquids simultaneously.
By reducing process cycle time and labor requirements, these
separators offer high cost efficiency in liquid clarification and
reclamation, solid-liquid separation and its classification,
recovery and thickening of solids and in other such processes.
Apply for lubrication oil, fuel, etc. two phase, three phase
separating Effective separate substances and solids from liquids.
Fuel treatment, Lube oil treatment, Marine, Power stations, Oil
field industry.
Centrifuge separator mainly apply to treat fuel, lubrication oil
and other mineral oils in marine diesel engines and diesel
generator sets in which contain water and mechanical impurities. CS
series will result in reducing mechanical wear of the diesel
engines and other machines so as to greatly extend lifetime of
machinery.
CP series can also be applied to separate two different liquids
with different proportion and being immiscible.
II. Description
Sino-NSH centrifugal separators, using principle of different
density of oil, water, solid (light, heavy phases) getting
different velocity, separate the insoluble liquids or solid
particles.
After getting through heating system, the viscosity of oil lowers
down. Then it is fed in through a system of closed lines. The heavy
liquid phase is pressure discharged by means of a centripetal pump.
The clean oil is also discharged by means of a centripetal pump.
The centrifuges operate with regulating rings for the heavy phase.
We have three models of centrifuge separator:
CP series: Manual Deslag type
CPA series: Semi-auto deslag with manual control
CPPA series: Fully-auto deslag with PLC control
III. Features
- Full automation possible with PLC automatic control panel.
- Centrifugal separation requiring no filter media.
- High reliability drive train system backed by delivery of over
1,000 units a year.
- Bowl design with superior separation performance and with good
response to discharge loads.
- Pilot valve regulates total/partial discharge of solids.
- Super partial discharger (option) minimizes liquid loss and
maximizes thickening of solid
- fraction for discharge.
- Vibration-proof design realizes long working life.
- Full automation possible with PLC automatic control
panel(Optional).
IV. Available Style
1. Mobile type or fixing type
2. Avaliable in different color.
V. Technical Specification of Centrifuge
| Model | Bowl Speed(rpm) | Capacity(Per Hour) | Running Load(Watts) | Witdh | Front to Back | Height |
| 250 | 7300 | 500 | 4 | 850 | 850 | 1200 |
| 400 | 7038 | 1500 | 7.5 | 1500 | 1100 | 1550 |
| 500 | 6600 | 5000 | 15.5 | 1772 | 1500 | 1855 |
| 550 | 6200 | 8000 | 18.5 | 1970 | 1560 | 1970 |
| 700 | 4500 | 35000 | 55 | 2097 | 1897 | 2384 |
More details please contact us.
Multifunction Lubrication Oil Processing/oil recycling/oil
filtration/oil regeneration/oil
treatment/oil purification Plants
